Solara V6-3.3L (3MZ-FE) (2004)
/Page-1705001.png)
License Plate Lamp: Service and Repair
LICENSE PLATE LAMP ASSY
OVERHAUL
HINT: Installation is in the reverse order of removal.
1. REMOVE REAR FLOOR FINISH PLATE
2. REMOVE LICENSE PLATE LAMP ASSY
a. Disconnect the connector and grommet.
b. Using a screwdriver, disconnect the 2 license plate lamp assys.
HINT: Tape the screwdriver tip before use.
3. REMOVE LICENSE PLATE LAMP LENS
a. Remove the 2 license plate lamp lenses as shown in the illustration.
4. REMOVE LICENSE PLATE LAMP LENS
5. REMOVE LICENSE PLATE LAMP BULB
a. Remove the 2 license plate lamp bulbs.
6. REMOVE LICENSE PLATE LAMP SOCKET AND WIRE
