Solara V6-3.3L (3MZ-FE) (2004)
/Page-313005.png)
the adjustment shim to be installed.
e) Turn the crankshaft 2/3 of a revolution (240°), and check the valves indicated in the illustration on the left.
1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Valve clearance (Cold)
2) Record valve clearance measurements that are out of the specified range. These measurements will be used later to determine the size of
the adjustment shim to be installed.
13. ADJUST VALVE CLEARANCE
a) Turn the camshaft so that the cam lobe faces upward.
b) Turn the valve lifter with a screwdriver so that the notches are perpendicular to the camshaft.
