Solara V6-3.3L (3MZ-FE) (2004)
/Page-650002.png)
c. Disconnect the heater inlet water hose.
d. Remove the nut and disconnect the ground cable.
e. Disconnect the 6 fuel injector connectors.
f.
Loosen and remove the intake manifold's 9 bolts and 2 nuts uniformly in the numerical order shown in the illustration.
g. Remove the intake manifold.
NOTE: Fully removing each bolt and nut one by one may damage the intake manifold, bolts and nuts.
8. REMOVE ENGINE MOVING CONTROL ROD
9. REMOVE WATER OUTLET
a. Disconnect the radiator hose inlet.
