Solara V6-3.3L (3MZ-FE) (2004)
Ignition Switch: Service and Repair
IGNITION OR STARTER SWITCH ASSY (3MZ-FE)
REPLACEMENT
HINT: The installation procedures are the removal procedures in reverse order.
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH
3. REMOVE IGNITION OR STARTER SWITCH ASSY
a. Disconnect the ignition switch connector and unlock warning switch connector.
b. Remove the clamp.
c. Remove the 2 screws and ignition switch.