Solara V6-3.3L (3MZ-FE) (2004)
/Page-1219002.png)
a) Remove the bolt and separate the flexible hose from the shock absorber.
b) Remove the 2 bolts and separate the rear disc brake caliper assy.
NOTICE: Use a string or similar device to keep the brake caliper from hanging down by the flexible hose.
3. REMOVE REAR DISC
4. DISCONNECT SKID CONTROL SENSOR
a) Disconnect the connector.
5. REMOVE REAR AXLE HUB & BEARING ASSY LH
a) Remove the 4 bolts and hub & bearing assy LH.
6. INSTALL REAR AXLE HUB & BEARING ASSY LH
