Solara V6-3.3L (3MZ-FE) (2004)
a) Temporarily install the 2 nuts and 2 washers to the rear axle LH hub bolt as shown in the illustration.
b) Using SST and a hammer handle or an equivalent to hold the hub & bearing assy, remove the rear axle LH hub bolt.
SST 09628-10011
5. INSTALL REAR AXLE LH HUB BOLT
a) Install a washer and nut to a new bolt, as shown in the illustration.
b) Using a hammer handle or an equivalent to hold the hub & bearing assy, install a new rear axle LH hub bolt by tightening the nut.
6. INSTALL REAR DISC
7. INSTALL REAR DISC BRAKE CALIPER ASSY LH
8. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)