Solara V6-3.3L (3MZ-FE) (2004)
a) Remove the connector from the transmission floor shift assy.
b) Using a screwdriver, release the stopper of the connector.
c) Remove the position indicator lamp bulb from the indicator lamp wire.
d) Using a small screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.
19. INSTALL INDICATOR LAMP WIRE SUB-ASSY
a) Connect the 2 terminals of the indicator lamp wire harness to the transmission control switch connector.
b) Install the position indicator lamp bulb to the indicator lamp wire.