Solara V6-3.3L (3MZ-FE) (2004)
Transmission Speed Sensor: Service and Repair
SPEED SENSOR (ATM)
REPLACEMENT
1. REMOVE AIR CLEANER ASSY
2. REMOVE AIR CLEANER HOSE NO.1
3. REMOVE AIR CLEANER BRACKET
4. REMOVE AIR CLEANER INLET NO.1
5. REMOVE SPEED SENSOR (NT SENSOR)
a) Disconnect the speed sensor connector.
b) Remove the bolt and transmission revolution sensor.
6. REMOVE SPEED SENSOR (NC SENSOR)
a) Disconnect the speed sensor connector.
b) Remove the bolt and transmission revolution sensor.
7. INSTALL SPEED SENSOR (NC SENSOR)
a) Coat an O-ring with ATF.
b) Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure of the manufacturer's name.
c) Connect the speed sensor connector.
8. INSTALL SPEED SENSOR (NT SENSOR)