Solara V6-33L (3MZ-FE) (2004) Axle Shaft Assembly Diagram | Page 4578
Grease capacity
g) Aligning the matchmarks, install the inboard joint assy to the outboard joint shaft assy.
38. INSTALL FIR AXLE INBOARD JOINT BOOT
a) Install the inboard joint boot to the inboard joint assy.
39. INSTALL FRONT AXLE INBOARD JOINT BOOT LH NO.2 CLAMP
a) 2AZ-FE Engine: Claw Engagement
1) Using pliers, install the inboard joint boot LH No.2 clamp, as shown in the illustration.
b) 3MZ-FE Engine: Omega Clamp Type Install new inboard joint boot clamps.
1) Hold the drive shaft lightly in a soft vise.
2) Install new 2 inboard joint boot clamps to the boot.