Solara Coupe L4-2.4L (2AZ-FE) (2007)
(b) Remove the lock nut and parking brake adjusting nut.
(c)
Remove the 2 bolts and clip.
(d) Using a screwdriver, disconnect the parking brake cable assembly No.1 and remove the parking brake lever sub-assembly.
6. REMOVE PARKING BRAKE SWITCH ASSEMBLY
(a)
Remove the screw and parking brake switch assembly.
INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a)
Install the parking brake switch assembly with the screw.
2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
(a)
Connect the parking brake cable assembly No.1 to the lever and install the parking brake adjusting nut and lock nut.
(b) Install the parking brake lever sub-assembly with the 2 bolts and clip.
Torque: 22 Nm (225 kgf-cm, 16 ft. lbs.)
(c)
Connect the parking brake switch connector.
3. INSPECT PARKING BRAKE LEVER TRAVEL
4. ADJUST PARKING BRAKE LEVER TRAVEL