toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 5648 > < Removal and Replacement|Page 5646
Page 5
background image

a. Fold back the floor carpet.

HINT:  Fold back the floor carpet so that the air duct rear No.2 can be removed.

b. Remove the 2 screws, bolt and nut.
c. Remove the air duct rear No.2.

11. REMOVE INSTRUMENT PANEL BRACE SUBASSEMBLY NO.1

a. Remove the 2 bolts and 2 earth wires.

b. Remove the nut and release the connector holder.

c. Disconnect the 2 wire harness clamps.

Removal and Replacement|Page 5648 > < Removal and Replacement|Page 5646