toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 5672 > < Removal and Replacement|Page 5670
Page 5
background image

a. Release the 2 fitting claws and remove the air filter sub assembly.

b. Remove the clean air filter from the front cooler frame.

2. REMOVE COWL WIRE NO.2

a. Remove the clamp and cowl wire No. 2.

3. REMOVE RECIRCULATION DAMPER SERVO SUBASSEMBLY

a. Remove the 3 screws and air inlet servomotor (recirculation damper servo sub-assembly).

4. REMOVE INSTRUMENT PANEL WIRE NO.3

Removal and Replacement|Page 5672 > < Removal and Replacement|Page 5670