Solara Coupe L4-2.4L (2AZ-FE) (2007)
Tire Pressure Module: Service and Repair
TIRE PRESSURE WARNING ECU
REMOVAL
NOTICE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for
re-registration of transmitter IDs.
1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH (for Coupe)
3. REMOVE FRONT DOOR SCUFF PLATE RH (for Convertible)
4. REMOVE COWL SIDE TRIM SUBASSEMBLY RH (for Coupe)
5. REMOVE COWL SIDE TRIM SUBASSEMBLY RH (for Convertible)
6. REMOVE NO. 1 UNDER INSTRUMENT PANEL COVER SUBASSEMBLY
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
8. REMOVE TIRE PRESSURE WARNING ECU
(a)
Remove the nut.
(b) Disconnect the connector and clamp.
(c)
Remove the tire pressure warning ECU.
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU