Solara Coupe L4-2.4L (2AZ-FE) (2007)
(a)
Connect the connector and clamp to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 inch lbs.)
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
3. INSTALL NO. 1 UNDER INSTRUMENT PANEL COVER SUBASSEMBLY
4. INSTALL COWL SIDE TRIM SUBASSEMBLY RH (for Coupe)
5. INSTALL COWL SIDE TRIM SUBASSEMBLY RH (for Convertible)
6. INSTALL FRONT DOOR SCUFF PLATE RH (for Coupe)
7. INSTALL FRONT DOOR SCUFF PLATE RH (for Convertible)
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Programming and
Relearning/Initialization
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal.
10. REGISTER TRANSMITTER ID
11. INSPECT TIRE PRESSURE WARNING SYSTEM
12. INITIALIZE SYSTEM
NOTICE:
^
Be sure to register the transmitter IDs of all tires including the grand spare tire in the ECU before initialization.
^
Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.