Solara Coupe L4-2.4L (2AZ-FE) (2007)
/Page-1570001.png)
Vanity Lamp: Testing and Inspection
INSPECTION
1. LH VISOR ASSEMBLY
a. Connect the positive (+) lead from the battery to one of the terminal and the negative (-) lead to other terminal, then check that the illumination
comes on when the switch is in the ON position.
OK: Light comes on.
2. RH VISOR ASSEMBLY
a. Connect the positive (+) lead from the battery to one of the terminal and the negative (-) lead to other terminal, then check that the light comes
on when the switch is in the ON position.
OK: Light comes on.
