Solara Coupe L4-2.4L (2AZ-FE) (2007)
/Page-461001.png)
Engine Control Module: Removal and Replacement
REMOVAL
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
4. REMOVE INSTRUMENT PANEL N0.1 UNDER COVER SUB-ASSEMBLY
5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH
6. REMOVE ECM
a. Remove the 2 wire harness clamps.
b. Disconnect the 5 ECM connectors.
c. Remove the 2 nuts and ECM.
7. REMOVE ECM BRACKET
a. Remove the 2 screws and ECM bracket.
8. REMOVE ECM BRACKET N0.2
a. Remove the 2 screws and ECM bracket.
INSTALLATION
