Solara Coupe L4-2.4L (2AZ-FE) (2007)
sprocket.
(2) Raise the No.2 camshaft and temporarily tighten the sprocket bolt.
(3) Examine the front marks and numbers of the 5 bearing caps and install them. Then install the 10 bearing cap bolts. Uniformly tighten the
bolts in the sequence shown in the illustration.
Torque:
Bearing cap No.2 30 Nm (306 kgf-cm, 22 ft. lbs.)
Bearing cap No.3 9.0 Nm (92 kgf-cm, 80 inch lbs.)
(4) Fix the camshaft with a wrench, then tighten the sprocket bolt.
Torque: 54 Nm (551 kgf-cm, 40 ft. lbs.)
NOTICE: Be careful not to damage the valve lifter.
(m) Check that the timing chain paint marks are aligned with the camshaft timing sprocket timing mark and the camshaft timing gear timing mark.
Also check the alignment of the pulley groove and chain cover timing mark 0.