Solara Coupe L4-2.4L (2AZ-FE) (2007)
/Page-112004.png)
3. INSTALL REAR DISC
a. Aligning the matchmarks, install the rear disc.
HINT: when replacing the rear disc with a new one, select the installation position where the rear disc has the minimum runout.
4. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH
5. CONNECT SKID CONTROL SENSOR WIRE
a. Connect the connector to the skid control sensor.
6. INSTALL REAR WHEEL
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
7. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
8. CHECK ABS SPEED SENSOR SIGNAL
