Solara Coupe L4-2.4L (2AZ-FE) (2007)
Alternator: Overhaul
DISASSEMBLY
1. REMOVE GENERATOR CLUTCH PULLEY
a. Using a screwdriver, puncture the center of the generator pulley cap and pry it off.
NOTE: Do not reuse the generator pulley cap.
b. Set SST (A) and (B).
SST 09820-63020
c. Clamp SST (A) in a vise.
d. Place the rotor shaft end into SST (A).
e. Fit SST (B) to the clutch pulley.