Solara Coupe L4-2.4L (2AZ-FE) (2007)
2. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY
(a)
Fix the steering wheel with the seat belt in order to prevent rotation.
HINT: This operation is useful to prevent damage to the spiral cable.
(b) Loosen bolt A and remove the clamp from the hole cover No. 1.
(c)
Separate the hole cover No.2 from the hole cover No.1.
(d) Loosen bolt B.
(e)
Put matchmarks on the steering intermediate shaft assembly and the power steering gear assembly.
(f)
Remove the bolt and disengage the intermediate shaft assembly.
3. REMOVE FRONT WHEEL
4. SEPARATE TIE ROD ASSEMBLY LH
5. SEPARATE TIE ROD ASSEMBLY RH
SST 09628-62011
HINT: Perform the same procedure as for the LH.
6. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH
HINT: Separate the upper side of the stabilizer link assembly.
7. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT:
^
Perform the same procedure as for the LH.
^
Separate the upper side of the stabilizer link assembly.