Solara Coupe L4-2.4L (2AZ-FE) (2007)
/Page-1044001.png)
Ball Joint: Specifications
Wear Limit
Use a torque wrench to turn the nut continuously at a rate of 3 to 5 seconds per 1 turn. Take the torque reading on the 5th turn.
Turning torque ................................................................................................................................ 0.98 to 3.43 Nm (10 to 35 kgf-cm, 8.7 to 30 ft. lbs.)
If the value is not within the specification, replace the lower ball joint assembly with a new one.
