Solara Coupe L4-2.4L (2AZ-FE) (2007)
Axle Shaft Assembly: Service and Repair
Reassembly
FRONT DRIVE SHAFT
REASSEMBLY
1. INSTALL FRONT DRIVE SHAFT BEARING
a. Install a new bearing bracket hole snap ring to the front driver shaft assembly RH.
b. Using SST and a steel plate, install a new front drive shaft bearing.
SST 09710-30021 (09710-03141)
NOTICE: Bearing should be completely installed.
c. Using a snap ring expander, install a new drive shaft hole snap ring.
2. INSTALL FRONT DRIVE SHAFT DUST COVER
a. Using SST and a press, install a new drive shaft dust cover.
SST 09726-40010, 09527-10011
NOTICE:
^
Dust cover should be completely installed.
^
Be careful not to damage the dust cover.