toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Windshield/Back Glass Ticking Noise|Page 8121 > < Body - Windshield/Back Glass Ticking Noise|Page 8119
Page 5
background image

a. Install 2 new stoppers to the vehicle body as shown in the illustration.

3. INSTALL WINDSHIELD GLASS RETAINER

a. Install 2 new retainers onto the windshield glass as shown in the illustration.

4. INSTALL WINDSHIELD ADHESIVE DAM

a. Apply Primer G to the installation part of the windshield adhesive dams.

NOTICE:

Allow the Primer G to dry for 3 minutes or more.

Throw away any leftover Primer G.

-

Do not apply too much Primer G.

b. Apply double-sided tape along the outer edge of the entire windshield glass except for the area marked D and E in the illustration.

Body - Windshield/Back Glass Ticking Noise|Page 8121 > < Body - Windshield/Back Glass Ticking Noise|Page 8119