Solara Coupe V6-3.3L (3MZ-FE) (2008)
Acceleration/Deceleration Sensor: Service and Repair
Removal
BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR:
REMOVAL
NOTICE:
-
Do not use the yaw rate sensor if it is dropped or damaged.
-
Prevent foreign matter from attaching between the yaw rate sensor bracket and body.
-
Confirm the sensor direction is correct.
1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
HINT: (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal)
2. REMOVE REAR CONSOLE BOX ASSEMBLY
3. REMOVE YAW RATE SENSOR ASSEMBLY
(a) Disconnect the yaw rate sensor connector.
(b) Remove the 2 bolts and yaw rate sensor.