Solara Coupe V6-3.3L (3MZ-FE) (2008)
Steering Angle Sensor: Service and Repair
Installation
BRAKE CONTROL: STEERING ANGLE SENSOR:
INSTALLATION
1. INSTALL STEERING ANGLE SENSOR
(a) Align the locating pins, engage the claws, and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR (See: Restraint Systems/Air Bag Systems/Clockspring
Assembly / Spiral Cable/Service and Repair/Installation)
3. INSTALL STEERING COLUMN COVER (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
4. INSTALL STEERING LOWER COLUMN COVER (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
5. ADJUST SPIRAL CABLE (See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation)
6. INSTALL STEERING WHEEL ASSEMBLY (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
7. INSPECT STEERING WHEEL CENTER POINT (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
8. INSTALL STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
9. INSTALL NO. 2 STEERING WHEEL COVER LOWER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
10. INSTALL NO. 3 STEERING WHEEL COVER LOWER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization)
12. INSPECT STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
13. INSPECT SRS WARNING LIGHT
HINT: (See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System)