Solara Coupe V6-3.3L (3MZ-FE) (2008)
REMOVAL
1. DRAIN BRAKE FLUID
NOTE: Wash brake fluid off immediately if it adheres to any painted surface.
2. DISCONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization)
3. REMOVE BRAKE ACTUATOR WITH BRACKET
(a) Using SST, disconnect the 6 brake tubes from the actuator with bracket.
(b) Use tags or make a memo to identify the reconnection points.
(c) Pull the lock lever upward.
(d) Disconnect the actuator connector.
(e) Remove the 3 bolts and the actuator with bracket.