Solara Coupe V6-3.3L (3MZ-FE) (2008)
/Page-1851010.png)
(e) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
18. CHECK HARNESS AND CONNECTOR (DRL NO. 2 RELAY AND DRL NO. 3 RELAY - BULB)
(a) Disconnect the H1 and H3 bulb connectors
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
19. CHECK HARNESS AND CONNECTOR (BULB - DRL NO. 4 RELAY TERMINAL 3)
(a) Remove the DRL No. 3 relay.
