Solara Coupe V6-3.3L (3MZ-FE) (2008)
(b) Using a service wire, connect 2C-10 of the wire harness side and body ground.
OK:
Headlight comes on.
NG -- INSPECT ENGINE ROOM J/B
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
2. INSPECT ENGINE ROOM J/B
(a) Disconnect the 1H connector from the instrument panel junction block assembly.
(b) Using a service wire, connect 1H-11 of the engine room J/B and body ground.
OK:
Headlight comes on.
NG -- INSPECT ENGINE ROOM J/B
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (ENGINE ROOM J/B - INSTRUMENT PANEL JUNCTION
BLOCK ASSEMBLY)
3. INSPECT ENGINE ROOM J/B
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- INSPECT ENGINE ROOM J/B
OK -- Continue to next step.
4. INSPECT ENGINE ROOM J/B
(a) Remove the HEAD relay from the engine room J/B.