Solara Coupe V6-3.3L (3MZ-FE) (2008)
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
17. CHECK HARNESS AND CONNECTOR (DRL NO. 2 RELAY TERMINAL 5 - DRL NO. 3 RELAY TERMINAL 5)
(a) Disconnect the 2C connector from the instrument panel junction block assembly.
(b) Using a service wire, connect 2C-10 of the wire harness side and body ground.
(c) Using a service wire, connect 2C-23 of the wire harness side and body ground.
(d) Remove the DRL No. 3 relay.