Solara Coupe V6-3.3L (3MZ-FE) (2008)
Fuel Gauge Sender: Testing and Inspection
3MZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY:
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Remove the fuel sender gauge assembly.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between the terminals 2 (FE) and 3 (FS) of connector according to the value(s) in the table below.
Standard resistance:
HINT: If the value is not as specified, replace the fuel sender gauge assembly.