Solara Coupe V6-3.3L (3MZ-FE) (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna):
REMOVAL
1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization).
2. REMOVE FRONT DOOR SCUFF PLATE LH (for Coupe) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal)
3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Coupe) (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly/Removal)
4. REMOVE REAR SEATBACK ASSEMBLY (for Convertible)
HINT: Refer to the procedures up to "REMOVE REAR SEATBACK ASSEMBLY" (See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly/Removal).
5. REMOVE REAR SEATBACK ASSEMBLY (for Coupe) (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal)
6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Coupe)
7. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH (for Coupe) (See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and
Repair/Rear Seat Outer Belt Assembly/Removal)
8. REMOVE CENTER PILLAR GARNISH LH (for Coupe) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
)
9. REMOVE NO. 1 CUP HOLDER (for Convertible)
10. REMOVE UPPER QUARTER TRIM PANEL LH (for Convertible) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal)
11. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (for Coupe) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal)
12. REMOVE UPPER QUARTER TRIM PANEL LH (for Coupe)
(a) Remove the upper quarter trim panel LH.
13. REMOVE TIRE PRESSURE WARNING RECEIVER (for Coupe)