Solara Coupe V6-3.3L (3MZ-FE) (2008)
(b) 3MZ-FE engine: (See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal)
3. REMOVE STABILIZER BAR REAR
HINT: (See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar/Removal)
4. SEPARATE REAR STRUT ROD ASSEMBLY
HINT: (See: Trailing Arm/Service and Repair/Removal)
5. SEPARATE NO.2 REAR SUSPENSION ARM ASSEMBLY LH
(a) Remove the bolt, nut and the rear suspension arm No.2 (outer side) from the rear axle carrier.
NOTE: When removing the bolt, keep the nut from rotating.
6. SEPARATE NO.2 REAR SUSPENSION ARM ASSEMBLY RH
HINT: Separate the RH side using the same procedure as for the LH side.
7. SEPARATE NO.1 REAR SUSPENSION ARM ASSEMBLY
(a) Remove the bolt, nut and the rear suspension arm No.1 (outer side) from the rear axle carrier.
NOTE: When removing the bolt, keep the nut from rotating.
8. REMOVE NO.1 REAR SUSPENSION ARM ASSEMBLY RH
HINT: Separate the RH side using the same procedure as for the LH side.
9. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the rear suspension member with a jack.
(b) Remove the 4 nuts, 2 bolts and 4 retainers from the rear suspension member.
(c) Lower the rear suspension member.
10. REMOVE NO.1 REAR SUSPENSION ARM ASSEMBLY LH