Solara Coupe V6-3.3L (3MZ-FE) (2008)
/Page-1277004.png)
(a) Install the front coil spring insulator lower LH onto the shock absorber assembly front LH.
(b) Install the front spring bumper LH to the piston rod.
(c) Compress the front coil spring LH using SST.
SST: 09727-30021
09727-00010
09727-00021
NOTE: Do not use an impact wrench. It will damage the SST.
HINT: Use 2 of the same type of SST.
(d) Install the front coil spring LH to the shock absorber assembly front LH.
HINT: Fit the lower end of the front coil spring LH into the gap of the front coil spring lower LH.
(e) Install the front coil spring insulator upper LH as shown in the illustration.
(f) Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing to the outside of the vehicle.
(g) Install a new front suspension support bearing LH as shown in the illustration.
