Solara Coupe V6-3.3L (3MZ-FE) (2008)
Tire Pressure Warning Reset Switch: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly LH.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for Coupe)
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for Convertible)
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Coupe)
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Convertible)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization).
8. INSPECT TIRE PRESSURE WARNING SYSTEM
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See: Tire Monitoring System/Testing
and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure).