Solara Coupe V6-3.3L (3MZ-FE) (2008)
(a) Using a brush, apply Primer M to the exposed part of the vehicle body.
-
Allow the Primer M to dry for 3 minutes or more.
-
Do not apply Primer M to the adhesive.
-
Throw away any leftover Primer M.
-
Do not apply too much Primer M.
(b) Using a brush or sponge, apply Primer G to the contact surface of the quarter window glass.
HINT: If Primer G is applied to an area other than that which is specified, wipe off the primer with white gasoline before it dries.
NOTICE:
-
Allow the Primer G to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
(c) Apply adhesive to the quarter window glass.
Adhesive:
Part No. 08850-00801 or equivalent
(1) Cut off the tip of the cartridge nozzle.
HINT: After cutting off the tip, use all adhesive within the time written in the table below.
Usage timeframe:
(2) Load the sealer gun with the cartridge.
(3) Apply adhesive to the quarter window glass as shown in the illustration.