Starlet L4-1290cc 4KE (1983)
Timing Chain: Service and Repair
REMOVAL
Drive Belt And Water Pump Pulley Removal
1. Loosen the water pump pulley set bolts.
2. Remove the drive belt adjusting bolt, and remove the drive belt.
3. Remove the water pump pulley from the water pump.
Crankshaft Pulley Removal
4. Remove the crankshaft pulley set bolt.
5. Using SST (09213-31021), remove the crankshaft pulley.
Timing Chain Cover Removal
6. Remove the timing chain cover bolts and nuts as shown in the figure.
7. Using a plastic faced hammer, loosen the timing chain cover and remove it.
8. Remove timing chain tensioner and vibration damper.
9. Remove the camshaft sprocket set bolt.
Removing Timing Chain And Camshaft Sprocket
10. Remove the timing chain and camshaft sprocket together.
