toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Body|Adjustments > < On-Vehicle Inspection|Page 3925
Page 6
background image

(f)  Recheck the continuity between terminals IDL and E2.

Clearance between
lever and stop screw -

(IDL - E2)    

0.41 mm (0.018 in.) - 

Continuity

0.48 mm (0.019 in.) -

No continuity 

6.  REINSTALL SUB-THROTTLE ACTUATOR.

Install the sub-throttle actuator with the 4 screws.

Throttle Body|Adjustments > < On-Vehicle Inspection|Page 3925