Supra L6-2997cc 3.0L DOHC MFI (1998)
c. 4 pad support plates.
INSTALLATION
Installation is in the reverse order of removal.
1. After installation, fill brake reservoir with brake fluid and bleed brake system.
2. Check for leaks.
Disassembly and Reassembly
DISASSEMBLY
1. Remove cylinder boot set rings and boots.
Using a screwdriver, remove the cylinder boot set rings and boots from the cylinder.
2. Remove pistons.
a. Place a piece of cloth or similar article between the piston and the caliper.
b. Use compressed air to remove the pistons from the cylinder.
