Supra L6-2997cc 3.0L DOHC MFI (1998)
Brake Caliper: Service and Repair
Rear
Removal and Installation
REMOVAL
1. Disconnect flexible hose.
a. Remove the union bolt and 2 gaskets from the brake caliper, then disconnect the flexible hose from the brake caliper.
Torque: 30 Nm (22 ft. lbs.)
HINT: At the time of installation, please refer to the following item.
Install the flexible hose lock securely in the lock hole in the caliper.
b. Use a container to catch the brake fluid as it drains out.
2. Remove caliper.
a. Hold the sliding pin and loosen the 2 installation bolts.
Torque: 34 Nm (25 ft. lbs.)
b. Remove the 2 installation bolts.
c. Remove the caliper from the torque plate.
3. Remove these parts:
a. 2 anti-squeal springs.
