Supra L6-2997cc 3.0L DOHC MFI (1998)
c. Remove the bolt and upper radiator support. Remove the 2 upper radiator supports.
HINT: At the time of installation, please refer to the following items. Check that the rubber cushion (A) of the support is not depressed.
Torque: 15 Nm (11 ft. lbs.)
d. Lift out the radiator assembly.
e. Remove the 2 lower radiator supports.
10. REMOVE DRAIN HOSE FROM RADIATOR
11. 2JZ-GTE: REMOVE ENGINE COOLANT TEMPERATURE (ECT) SWITCH FROM RADIATOR
a. Remove the ECT switch.
HINT: At the time of installation, please refer to the following item. Apply soapy water to the O-ring, and install the ECT switch.
Torque: 7.4 Nm (65 inch lbs.)
b. Remove the O-ring from the ECT switch.
HINT: At the time of installation, please refer to the following item. Use a new O-ring.
12. REMOVE NO.1 FAN SHROUD FROM RADIATOR
2JZ-GE: Remove the 4 bolts and No.1 fan shroud.
2JZ-GTE: Remove the 5 bolts and No.1 fan shroud.
INSTALLATION
Installation is in the reverse order of removal.