Supra L6-2997cc 3.0L DOHC MFI (1998)
a. Disconnect the Engine Coolant Temperature (ECT) sensor and sender gauge connectors.
b. Remove the 2 bolts, water outlet and gasket.
c. Remove the No.1 water bypass pipe and 2 O-rings.
13. REMOVE WATER PUMP
a. Loosen the nut and remove the bolt, and slightly slide the generator from the water pump.
b. 2JZ-GE: Remove the bolt, and disconnect the clamp bracket.
c. 2JZ-GE: Remove the bolt, and disconnect the connector bracket (for crankshaft position sensor connector).
d. Remove the 2 nuts, and disconnect the No.2 water bypass pipe from the water pump.
e. 2JZ-GTE: Disconnect the No.3 turbo water hose from the water pump.
f.
Remove the 6 bolts, water pump and gasket.
g. Remove the drain hose
h. Remove the O-ring from the cylinder block.
INSPECTION