Supra L6-2997cc 3.0L DOHC MFI (1998)
Timing Belt: Service and Repair
Timing Belt Installation
INSTALLATION
1. INSTALL CRANKSHAFT TIMING PULLEY
a. Align the pulley set key with the key groove of the pulley.
b. Slide on the timing pulley facing the flange side inward.
NOTICE: Do not scratch the sensor part of the crankshaft timing pulley.
c. Install the timing belt plate with the bolt.
Torque: 8.0 Nm (71 inch lbs.)
2. INSTALL IDLER PULLEY
a. Apply adhesive to 2 or 3 threads of the pivot bolt.
Adhesive: Part No. 08833 - 00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Using a 10 mm hexagon wrench, install the plate washer and pulley with the pivot bolt.
Torque: 35 Nm (26 ft. lbs.)
c. Check that the pulley bracket moves smoothly.
