Supra L6-2997cc 3.0L DOHC MFI (1998)
Air Door Actuator / Motor: Service and Repair
REMOVAL
1. REMOVE AIR INLET SERVOMOTOR
a. Remove instrument panel.
b. Remove air inlet servomotor.
1. Disconnect the connector.
2. Disconnect the control link.
3. Remove the 3 screws and the air inlet servomotor.
2. REMOVE AIR MIX SERVOMOTOR
a. Remove instrument panel.
b. Remove air mix servomotor.
1. Remove the defroster duct.
2. Remove the 3 screws and the water valve cover.
3. Disconnect the connector.
4. Remove the 3 screws and the servomotor then disconnect the control link.
3. REMOVE AIR OUTLET SERVOMOTOR
a. Remove instrument panel.
b. Remove air outlet servomotor.
1. Disconnect the connector.
2. Remove the 3 screws and the air outlet servomotor.
INSTALLATION
Installation is in the reverse order of removal.