Supra L6-2997cc 3.0L DOHC MFI (1998)
4. Bleed brake line.
a. Connect the vinyl tube to the brake caliper.
b. Depress the brake pedal several times, then loosen the bleeder plug with the pedal held down.
c. At the point when fluid stops coming out, tighten the bleeder plug, then release the brake pedal.
d. Repeat b) and c) until all the air in the fluid has been bled out.
Torque: (Bleeder plug) 11 Nm (8 ft. lbs.)
e. Repeat the procedure to bleed the brake line for each wheel of air.
5. Check fluid level in reservoir.
Check the fluid level and add fluid if necessary.
6. Install reservoir cap.
