Supra L6-2997cc 3.0L DOHC MFI (1998)
Timing Belt: Service and Repair
Timing Belt Removal
REMOVAL
1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. REMOVE RADIATOR ASSEMBLY
4. REMOVE DRIVE BELT, FAN, FLUID COUPLING ASSEMBLY AND WATER PUMP PULLEY
5. REMOVE POWER STEERING PUMP AND FRONT BRACKET
a. Remove the 3 bolts, plate washer and pump front bracket.
b. Disconnect the vane pump from the bracket.
6. REMOVE NO.3 TIMING BELT COVER
Using a 5 mm hexagon wrench, remove the 4 bolts, oil filler cap, timing belt cover and gasket.
7. REMOVE NO.2 TIMING BELT COVER
Using a 5 mm hexagon wrench, remove the 3 bolts, timing belt cover and gasket.
8. REMOVE DRIVE BELT TENSIONER
Remove the 3 bolts and tensioner.
NOTICE: Be careful not to drop the bolts inside the timing belt cover.