Supra L6-2997cc 3.0L DOHC MFI (1998)
(b) Remove the O-rings from the fuel pressure regulator.
INSTALLATION
1. INSTALL FUEL FILTER FROM FUEL PRESSURE REGULATOR
(a) Apply a light coat of gasoline to 2 new O-rings,and install it to the pressure regulator.
(b) Install the screw,and attach the fuel filter to the pressure regulator.
Torque: 2.0 N.m (20 kgf.cm,17 in.lbf)
(c) Check that the fuel filter rotate smoothly. (see step 2)
2. INSTALL FUEL PRESSURE REGULATOR
(a) Attach the pressure regulator to the main pipe.
(b) Check that the fuel filter rotate smoothly.
NOTICE: If it does not rotate smoothly, the O-ring may be pinched, so remove the pressure regulator and do steps (a) and (b) above again
3. INSTALL FUEL PUMP
(a) Connect the fuel pump with fuel hose to the pressure regulator.
(b) Install fuel pump to the pump bracket.
4. CONNECT GROUND STRAP
Install the ground strap with the screw to the fuel pump clamp.
Torque: 2.0 N.m (20 kgf.cm,17 in. lbf)
5. INSTALL LEAD WIRE FOR FUEL PUMP
6. INSTALL FUEL PUMP AND SENDER GAUGE ASSEMBLY
(a) Install a new gasket to the fuel tank.
(b) Insert fuel pump and sender gauge assembly into the fuel tank.
(c) Align the arrow marks of the fuel pump bracket and fuel tank.
(d) Temporarily install the retainer.
