toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Pressure Pulsation Damper > < Fuel Pressure Regulator|Diagrams|Page 3819
Page 3
background image

(e) Using SST tighten the retainer until the arrow mark on the retainer is within the lines on the fuel tank. SST 09808-14010
(f) Check that the arrow marks of the fuel pump bracket and fuel tank are aligned.
(g) Install the retainer clamp.
(h) Connect the connector and hoses to the fuel pump bracket:

-

Fuel pump connector

-

Ground connector

-

Fuel outlet hose
Connect the outlet hose with 2 new gaskets and the union bolt

Torque: 29 N.m (300 kgf.cm, 22 ft.lbf) 

-

Fuel breather hose

7. INSTALL SERVICE HOLE COVER
8. INSTALL SPARE WHEEL
9. INSTALL SPARE WHEEL COVER

10. INSTALL FLOOR CARPET
11. CHECK FOR FUEL LEAKS

Fuel Pressure Pulsation Damper > < Fuel Pressure Regulator|Diagrams|Page 3819