Supra L6-2997cc 3.0L DOHC MFI (1998)
15. Remove oil seal and spacer.
Using SST 09950-60010 (09951-00280), 09950-70010 (09951-07200) or equivalent, press out and remove the oil seal and spacer.
INSPECTION
NOTICE: When using a vise, do not overtighten it.
1. Inspect steering rack.
a. Using a dial indicator, check the rack for runout and for teeth wear or damage.
Maximum runout: 0.30 mm (0.0118 inch).
b. Check the back surface for wear or damage.
2. If necessary, replace oil seal and bearing.
a. Set Special Service Tool (SST) 09612-30012 or equivalent, to the rack housing.
b. Turn A clockwise and engage the tips of C on the bearing.
c. Using a (8 mm) spanner, keep A fixed while turning nut B clockwise, and remove the bearing.
NOTICE: Be careful not to damage the rack housing.