Supra L6-2997cc 3.0L DOHC MFI (1998)
NOTICE:
-
Make sure to install the oil seal facing the correct direction.
-
Take care that the oil seal does not get reversed as you install it.
3. Install steering rack.
a. Install SST 09631-20102 or equivalent, to the rack.
HINT: If necessary, scrape the burrs off the rack teeth end and burnish.
b. Coat SST with power steering fluid.
c. Install the rack into the rack housing.
NOTICE: Be careful not to damage the oil seal lip.
d. Remove the SST.
4. Install oil seal and two spacers.
a. To prevent oil seal lip damage, wind vinyl tape on the steering rack, and apply power steering fluid.
b. Coat a new oil seal lip with power steering fluid.
c. Install the oil seal by pushing it into the rack housing without tilting.
NOTICE:
-
Make sure to install the oil seal facing the correct direction.
-
Be careful not to damage the oil seal lip.
d. Install the two spacers into the rack housing.
5. Install the cylinder end stopper.
