Supra L6-2997cc 3.0L DOHC MFI (1998)
Front Door Window Motor: Testing and Inspection
INSPECT POWER WINDOW MOTOR OPERATION
Driver's Door:
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the motor turns clockwise.
b. Reverse the polarity, and check that the motor turns counterclockwise.
If operation is not as specified, replace the motor.
INSPECT POWER WINDOW MOTOR OPERATION
Passenger's Door:
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the motor turns clockwise.
b. Reverse the polarity, and check that the motor turns counterclockwise.
If operation is not as specified, replace the motor.
INSPECT PTC OPERATION
Driver's Door:
a. Disconnect the connector from the master switch.
b. Connect the positive (+) lead from the battery to terminal 9 and the negative (-) lead to terminal 10 on the wire harness side connector and raise the